Great Falls is known for large luxury homes with powerful plumbing systems, high-end bathrooms, and intense water pressure.
Families in neighborhoods like Great Falls Village, Riverbend, Leigh Mill, and Great Falls Estates often enjoy multi-head showers, soaking tubs, outdoor kitchens, and large washing machines.
These features look incredible, but they also create one common complaint.
The tankless water heater cannot maintain a steady temperature.
Homeowners tell me the water starts hot, then cools down, then warms up again, sometimes several times during one shower.
A broken water heater does not usually cause this issue.
The real problem is high flow demand.
Great Falls homes often use more gallons per minute than the tankless unit can support at once.
When the system reaches its limit, the water heater struggles to maintain a stable temperature.
That is why the temperature rises, drops, and rises again.
Let me explain why this happens in Great Falls homes and what I do to restore steady, reliable hot water during heavy use.
Why Tankless Systems Struggle In High-End Great Falls Homes
Tankless water heaters heat water as it flows through the system.
They are designed to provide endless hot water, but only up to a specific flow rate.
A typical tankless unit might be able to supply eight or nine gallons per minute.
Great Falls homes often demand far more than that, especially during busy morning routines or when multiple luxury fixtures run at the same time.
Here are examples of high-flow activities that overwhelm tankless systems
Multiple showers running at once
Large rainfall or multi-jet shower systems
Filling oversized soaking tubs
Running the dishwasher and washing machine together
Outdoor showers combined with indoor use
When the demand passes the limit, the tankless system can no longer keep the water at the set temperature.
How High Water Pressure Makes The Problem Worse
Many Great Falls homes have intense water pressure. While homeowners enjoy that powerful flow, it also means the tankless system must heat more water per second. High pressure pushes water through the heat exchanger faster than the system can heat it.
This causes the temperature to fluctuate as the tankless unit tries to keep up.
Even a well-maintained tankless system can struggle with pressure that is too high for its design.
Long Pipe Runs Create Additional Temperature Swings
The size of Great Falls homes also contributes to temperature issues.
Large houses have long pipe runs between fixtures.
Hot water loses heat as it travels, especially in winter, which causes the tankless system to cycle on and off.
This cycling creates temperature changes that homeowners feel during showers and baths.
The further the water has to travel, the more swings you will notice.
Signs Your Great Falls Tankless Water Heater Is Overloaded
Great Falls homeowners usually notice these warning signs before the problem becomes severe.
Water temperature rises and falls during a single shower
Hot water cuts out when another fixture turns on
The tankless unit makes clicking or pulsing sounds
The outdoor tankless unit feels extremely hot
The water never reaches the expected temperature
The soaking tub takes far too long to fill with hot water
These signs tell you the system is running at or above its maximum capacity.
How I Fix Tankless Temperature Swings In Great Falls
When I inspect a tankless system in Great Falls, I measure the actual flow rate of the homeās plumbing and compare it with the systemās heating capacity.
Many homes have more plumbing fixtures than a single tankless unit can support.
Here is what I typically do to solve the problem
Adjust the homeās water pressure to a safe level
Descale the tankless system to restore efficiency
Install a recirculation pump to reduce temperature swings
Recommend a higher capacity tankless unit for large homes
Install a second tankless unit to split the load
Improve insulation on long hot water lines
These upgrades help the system maintain a steady temperature even during heavy usage.
When A Second Tankless Unit Is The Best Choice
Great Falls homes with multiple luxury bathrooms often need two tankless water heaters.
One unit can supply the master suite while the other supports the rest of the home.
This ensures steady, reliable hot water for every fixture.
I recommend a second unit when
The home has more than three or four bathrooms
High flow fixtures are used daily
Temperature swings happen during every shower
The home is larger than four thousand square feet
The existing tankless system heats slower than expected
Installing a second unit transforms the hot water system into a dependable and comfortable setup.
Call Me If Your Great Falls Tankless Water Heater Has Temperature Swings
If your tankless system in Great Falls is struggling to keep the temperature steady, call me at 703 791 1339.
I can test the system, measure the demand, and give you clear options that guarantee steady hot water.
Great Falls homes deserve comfort, and I can help your tankless system deliver the performance you expect.
š Call Veteran Plumbing Services today at 703-791-1339
Iām Dennis Rollins. I served my country, and now Iām here to help you protect your home.
š Schedule online Veteran Plumbing Services Anytime ā 24 hours a day.
